Balboa BP501G1 Spa Pack PN 56485-05

• Balboa BP501G1 PN 56485 – Digital Spa pack for Tubs with Multiple Pumps.
• Features include freeze protection, ready and rest heating modes, two temperature ranges (high and low) and self-diagnostics as well as optional Wi-Fi capability.
• Requires 4-pin TP or spaTouch series top side controller and can also use 6-pin AX series auxiliary panels as well as the BWA Wi-Fi transceiver.

Specifications

• 10.56 High x 17 Long x 4.8 Deep
• UL/CSA certification
• Requires Balboa TP series panels and has connectors for 1 main panels and 1 auxiliary panels
• Optional Wi-Fi Module for use with iPhone, iPad, iPod, or Android device
• 120 or 230 VAC ozone support (ozone must have same voltage as heater pump)
• 240VAC @ 60 Hz or 50 Hz, 30-60 Amp 3 wire (needs neutral wire)
• High or Low current mode
• Max Load ratings: Pump 1= 16 amp; Pump 2/Blower = 12 amp; Ozonator = 1 amp; A/V = 5 amp; Light = 12 v @ 1 amp
• The flow through heater tube must be a minimum of 20 USGPM if the heater is 5.5kW. This flow rate should be checked if your spa uses a small circulation pump such a Laing E10 or others made by Grundfos or Waterway. These small pumps when used with 1 piping typically cannot produce this flow. A 3kW heater element is available which reduces flow requirement to 13 USGPM, call us!
• Can only handle 2 jet pumps (Pump One-1 or 2-speed pump | Pump Two- blower or 1- speed pump)
• Warranty 2 years for system including Heater and Serial top-side Panel

• MADE IN AMERICA